Step 1: Select your Fabric
Light Filtering Motorized Shade will block the UV, glares and will provide a complete privacy. The light will glow through the fabric, providing natural light throughout the day. The front and back of the fabric share the same color and texture. The colors and texture match the Blackout fabric selection so you can have both solutions in your home while keeping a homogeneous design.
LF Clean Kakhi
LF Dark Black
LF Deep Blue
LF Elegant Beige
LF Grey Slate
LF Light Cream
LF Simply White
LF Soft Taupe
What do I need to know about fabrics?
e-Bopp Fabrics are from Europe or USA – They are trendy and made to satisfy Customers’ daily use for many years. Safe to use and Robust, they comply with European and/or US Standards to guarantee their Quality.
Motorized Roller shades do not get dirty by hands or by the accumulation of dust as other type of shades. Nevertheless, in the eventuality of water projection, they remain very easy to clean with a dry cloth or clear water.
Step 2: Select your Cassette Color
The Fabric Insert on the Cassette will match the Fabric selected for your shade
What's in my Motorized Shade?
Introducing the Sonesse 30 WireFree (LI-ion) RTS
Somfy powers simplicity with the newest addition to the sonesse family of quiet motor solutions. It features a built-in, rechargeable lithium-ion battery to minimize maintenance, and a 2 Nm strong, powerful lifting capacity which increases your opportunity to motorize a wde range of sahdes and blinds… all without any wires !
Step 3: Select your Mount
Where would you like to install your motorized shade?
← Outside Mount →
→ Inside Mount ←
The perfect solution to ensure proper coverage of your window.
Reasons to choose an Outside Mount:
Outside Mounts are a trendy way to install shades and offer a modern style.
It’s the preferred solution for windows with handles.
Because the mount protrudes from the frame, Outside Mounts may block light more effectively than Inside Mounts.
Reasons not to choose an Outside Mount:
Outside Mounts are not suitable when two windows are near each other in the corner of a room. The two cassettes may interfere if there is not enough space (Greater than 4″ 1/2) in between.
A clean look inside the window frame.
Reasons to choose an Inside Mount:
An Inside Mount is a traditional way to install shades.
If you have a large window frame. The Height of the cassette (3.9″) will adapt and will not take much of the natural light.
It’s the preferred solution for windows next to each other in corners.
Reasons not to choose Inside Mount:
Even though it can be installed with folding or small handles, it does not work with big handles in the way of your shade.
If the depth of your window frame is less than 1.5″. To allow the installation of the brackets, the window frame depth MUST be greater than 1.5″.
If smaller than 3/4″ then OK.
If greater than 4″1/2 on both sides then OK. If smaller, an Inside Mount is required.
Be sure to place the measuring tape outside the handle, as shown.
If the Depth of your window frame is less than 1.5″, an Outside Mount is required.
If your window has a handle, we recommend choosing an Outside Mount.
ALWAYS Measure the width at the TOP and at the BOTTOM of your windows.
Step 4: Measure your Window
Measure twice, order once.
All measurements are to be taken in inches.
Contact us for shades greater than 96″ wide.
Measure Wall to Wall.
To see more window frames, see our Guide & FAQ.
Use the right tape.
Use tape showing the 1/8″ to prevent misreadings.
Measure Top & Bottom.
Even if there is no tile or plinth, ALWAYS measure TOP & BOTTOM.
Measure ALL Window Frames.
Even if your windows are identical, we recommend measuring them all.
Step 5: Name your Shade